|
Big hole
Before I took out the brace and smoothed the edges.
|
|
Warped edges
This is more of smoothing out the edges and making sure that they were flat and not wavy. As you can really see in the picture above on the corners.
|
I then put the headliner back in to start cutting it.
I had to cut right around the edges of the outside part of the frame of the sunroof. I made many cuts around to be sure I wouldn't cut the headliner too big. |
|
|
|
Trimming the headliner
This is the last time around making the cut in the headliner. I cut about 1/2 inch at a time making sure that the inner peice of the sunroof would cover the headliner.
|
Installing the interior trim ring and clamp
This is me putting the interior trim ring. This is very important because this clamps the outerpart of the sunroof frame to the roof. And that seals the caulking cord will crush and create a very good seal. |
|
|
|
Voila!
And this is the final product. This picture is with the glass closed. |
Vent
The sunroof in the highest vent setting, there are 5 heights that can be used. |
|
|
|
Glass removed
This is very nice when you can remove the glass withing 10 seconds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
